How To Restore An Old Iron Bench Into A Beautiful Garden Bench

How to restore an old iron bench into a beautiful garden bench by The Old Summers Home

Hello and welcome to The Old Summers Home. Today I want to show you a quick summer project I recently completed. We have had this poor neglected bench for far too long left in its terribly sad state. I am going to show you how to restore an old iron bench into a beautiful garden bench! It is quite easy to do and will give your old bench new life and many more years of use.

How to restore an old iron bench into a beautiful garden bench.

As you can see this bench was never maintained over the years and sat out in the sun rain and snow year-round. the wood had taken on a dark grey hue lacking all of its original beauty. However, the wood is still in immaculate condition. The cast iron was beginning to rust in a few places from all the moisture over the years but we will fix that right up, no worries.

Pressure wash the old iron bench

Before doing anything else I took the pressure washer and gave it a good spray down. A lot of the dirt in the wood came off and all the nasty spider webs. Just the washing alone revealed some of the woods natural beauty again. While pressure washing, be careful with how high of pressure you use on old wood as it can tear and splinter quite easy. Mine does not have an adjustment so I sprayed from afar so that I did not damage the wood.

Disassemble your old iron bench

Before we can go any further it is imperative to take the bench apart. Learning how to restore an old iron bench means learning how to take it apart so you can rebuild it later.

Disassemble the old bench before going any further with your restore

Grab a bowl to hold all of the washers nuts and bolts and whatever hardware you may need to remove. Most came apart rather quickly. A few of the bolts had rusted and consequently, they were difficult to remove. However, holding the nut with a wrench while unscrewing made short work of that.

Wire brush the cast iron

I took an automotive wire brush and cleaned up the legs a bit focusing on the rust areas. The old cast iron was still in pretty good shape. For the first time, I realized that the insert on the backrest of the bench was in fact plastic and not cast iron as the legs and handrail sides are.

old iron wire brushed and prepped for painting

Sand the wood pieces of your old iron bench

Using a palm sander I gave the wood a good sanding. The colour changed quite a bit during this part of the bench restore. I contemplated staining it in my mind but decided to go the route I already had planned. I can always change it up next time this old iron bench needs a restore!

Cleaned and sanded wood slats ready for paint

Now leave it for three weeks until you remember it again!

Just kidding, but this may or may not have happened for some length of time during my process haha.

How to restore an old iron bench with spray paint!

Now it is time to give that old bench some fresh paint. Or stain if you prefer!

My favourite method for painting is to use spray paint. I was very nervous to try it a few years ago and now it is my go-to. I absolutely love to use Rustoleum painters touch. It is a paint and primer all in one and the coverage is absolutely phenomenal. There are many colour choices available too!

Restore an old iron bench with Rustoleum paint and primer spray paint.

There is no doubt that I absolutely love all teals and turquoise in case you have not noticed haha. I chose Satin Blossom White for the iron leg-armrests and Satin Lagoon for the wood slats.

Lagoon spray paint by Rustoleum for all the old bench slats add a vibrant pop of colour.

Next, I started with a few light coats on each. Light coats prevent running and are essential for a perfect finish. The wood soaked up the paint like a thirsty wanderer lost in the desert! It took almost an entire can on these few wood slats to my surprise.

iron sides and plastic isert beinf sprayed for our how to restore an old iron bench into a beautiful garden bench tutorial!

Also, I spray painted all the screws, bolts and other hardware flat white. I wanted them to pop against the dark teal. Let everything dry well.

Finish the restore of the old iron bench

Now that everything is dry it is time to reassemble the old iron bench that is now beginning to look like a new garden beauty! Simply work in reverse from how you disassembled in the first place. Once it is complete, enjoy your beautiful garden bench!

Give your old iron bench a makeover with our simple How to restore tutorial!

I hope you loved this quick and easy restore of our old iron bench and that it inspires you to do one too! Giving old projects a new life is a great way to add to your decor and save something that has potential. The beauty is in the eyes of the beholder!

DIY Farmhouse Bench preview from related content post suggestion

If you love this quick and easy bench restore you re sure to love our DIY Farmhouse Backyard Bench! Check out how you can make your very own with a few pieces of Barnwood and 20 minutes of your time!

figure class=”wp-block-image”>

Until next time;

Jenn Summers

The Old Summers Home

12 thoughts on “How To Restore An Old Iron Bench Into A Beautiful Garden Bench

  1. Kippi says:

    WOW!!! This project is a stunning transformation. I had no idea that the center feature was that pretty until you painted it white!!!
    Way to go,
    Kippi

  2. Rachael says:

    Wow! (I sense a theme here). We have a bench, but I donโ€˜t think it would look that good even if I attacked it. At the moment, the most my MIL will agree on is a new cushion… perhaps I need to reconsider and do some serious convincing…

  3. Ashley says:

    WOW, This is beautiful. You did such an amazing job with this like all the gorgeous projects you do! Can’t wait for the next one. ๐Ÿ™‚

Leave a Reply

Your email address will not be published. Required fields are marked *